PVC Pipe

Performance Assessment of iPVC Pipe and Coupling for Large Ground Movement

Anonymous — Tue, 15 Nov 2022 07:00:00 +0000

Performance Assessment of iPVC Pipe and Coupling for Large Ground Movement Anonymous (not verified) Tue, 11/15/2022 - 00:00

Project Title: Performance Assessment of iPVC Pipe and Coupling for Large Ground Movement

Industry Partners: East Bay Municipal Utility District, Denver Water

CIEST Personnel: Nicholas Berty, Cory Ihnotic, Katherine O’Dell, Jessica Ramos

Primary Investigator: Prof. Brad Wham

Year: 2022

Project Summary: The intent of this study is to define the seismic response of iPVC pipeline systems with couplings and to illustrate procedures for interpreting laboratory results to seismically classify pipeline system performance following developing ASCE seismic guidelines. Twenty large-scale tests were performed on 6-in. diameter DR14 (PC305) iPVC pipe (C900) with five different commercially available reinforced connections. Test specimens were subjected to tension, compression, cyclic, and four point bending tests, determining the ultimate load capacity for each system in both axial and transverse directions. This study provides the first seismic classification for plastic pipe systems with reinforced connections.

Appreciation is extended to David Katzev and Katie Ross, along with all our pipe and coupling manufacturers, for their tremendous support.

Link to Report

Off

Traditional

White

Axial Capacity of Reinforced Gasketed Joints

Anonymous — Wed, 30 Sep 2020 06:00:00 +0000

Axial Capacity of Reinforced Gasketed Joints Anonymous (not verified) Wed, 09/30/2020 - 00:00

Full Project Title: Axial Capacity of C900 PVC Pipe with Reinforced Gasketed Joints

Year: 2019-20

Industry Partner: Denver Water

CIEST Personnel: Jessica Ramos, John Hindman, Brice Lucero, David Ballcells, Hayley Parnell, and Porter Hawkins

Primary Investigator: Prof. Brad Wham

Summary: The objective of this study was to impose externally applied axial loading to reinforced gasketed water pipeline joints to establish upper bound performance under worst case conditions of ground movement. Test protocols included axial tension and cyclic (progressive tension and compression) loading on bell-spigot style C900 PVC pipe to simulate deformations possible during natural hazards such as earthquakes and landslides . The test specimens consisted of either RieberLok Gasketed or Diamond Lok-21 pipe with a restraining ring. Tests provided measures of axial displacement capacity, pipeline connection strength, and failure mechanism. The results indicated these systems as potentially viable solutions for regions prone to persistent soil movement and settlement. Tests were conducted in partnership with Denver Water.

Failed specimen after testing in tension.

View the full report here.

Off

Traditional

White

Evaluation of Hazard-Resistant Pipelines

Anonymous — Fri, 27 Sep 2019 06:00:00 +0000

Evaluation of Hazard-Resistant Pipelines Anonymous (not verified) Fri, 09/27/2019 - 00:00

Full Project Title: Seismic Evaluation of Hazard-Resistant Pipelines: Axial Testing of PVC, PVCO, and iPVC Pipe with Coupling

Year: 2019

Industry Partners: East Bay Municipal Utility Department (EBMUD)

CIEST Personnel: Cory Ihnotic, David Kyle Anderson, Jessica Ramos, David Balcells, Brice Lucero, John Hindman, and co.

Primary Investigator: Prof. Brad Wham

Summary: The first in a series of testing programs at CU Boulder CIEST investigating performance of critical lifeline systems under extreme loading conditions. This study focuses on the response of various thermoplastic pipe materials and a coupling connection under externally applied axial and lateral loading. Internally pressurized, 6 in. (150 mm) diameter specimens were tested to failure under various loading scenarios including axial tension, compression, and cyclic loading as well as transverse 4-pt bending. This project initiated the development of self-reacting test frame capable of applying dynamic tension and/or compressive loading in excess of 100,000 lbs (445 kN) to linear structures up to 12 ft (3.66 m) long. CIEST’s 1,000,000 lb (4450 kN) four-post load frame was employed to apply lateral loading.

View the full report here.

Appreciation is extended to collaborators David Katzev and Timothy Harris of EBMUD for their intellectual and practical contributions to the project.

The first in a series of testing programs at CU Boulder CIEST investigating performance of critical lifeline systems under extreme loading conditions.

Off

Traditional

White